Skip to main content

Concrete Stain & Epoxy in Palm Beach Island, FL

Ground, repaired and sealed concrete coatings for garages, patios, pool decks and commercial floors that resist stains, wear and moisture.

Concrete Stain & Epoxy for Palm Beach Island Homes

Courtyards, loggias, pool decks and garages are part of daily life on Palm Beach Island, and worn or stained concrete can stand out next to fine stucco and stone. A penetrating stain or a decorative coating gives these areas a consistent, finished color that works with the rest of the property.

Garage floors get diamond ground, repaired and coated with an epoxy or polyaspartic system that resists oil and tire marks. Outdoor surfaces get a UV stable topcoat so the color holds in the sun instead of yellowing. Garages can usually take foot traffic within about 24 hours of the final coat.

What's Included

  • Moisture testing and inspection of the slab
  • Diamond grinding to remove contaminants and profile the surface
  • Crack, joint and divot repair
  • Epoxy or polyaspartic base coat
  • Chip flake broadcast, metallic or solid color finish
  • Acid stain finishes for a natural stone look
  • UV-stable, chemical-resistant topcoat
  • Non-slip additive for areas that get wet

Want the full picture? Read our complete concrete stain & epoxy guide or see everything we do in Palm Beach Island.

How We Prepare and Apply

  1. 1

    Assess the slab

    We check for cracks, old coatings, oil saturation and moisture, which tells us which system and primer the floor needs.

  2. 2

    Clear and degrease

    The area is emptied, swept and degreased so grinding does not push oil and dirt deeper into the surface.

  3. 3

    Diamond grind

    Industrial grinders profile the concrete and strip sealers and contaminants, with dust collection keeping the work area cleaner.

  4. 4

    Repair defects

    Cracks, spalls and divots are filled and ground flush so the finished floor is level and uniform.

  5. 5

    Apply base and topcoat

    The base coat goes down, with flakes or metallic pigment added where chosen, followed by the protective topcoat.

  6. 6

    Cure and hand back

    Most garage floors take foot traffic in 24 hours and vehicles in 72 hours, and we walk the floor with you before you use it.

Concrete Stain & Epoxy in Palm Beach Island: FAQ

Does my Palm Beach exterior paint project need approval?

It may. The Town of Palm Beach has an Architectural Commission, and designated landmarks fall under the Landmarks Preservation Commission. Check with the Town before scheduling. We can provide color samples and product data sheets for your application, and we start once your approval is in hand.

Can you paint a condo unit on the island?

Yes. Many island condo buildings set rules for work hours, elevator use, parking and insurance paperwork. Share your building's requirements with us when you request an estimate, and we will plan the job around them. Interior work in a unit usually focuses on walls, ceilings, doors and trim.

How do you handle decorative stucco and ironwork?

We clean and inspect moldings, cast details and railings first. Cracked stucco is opened and filled with a flexible patch, and rusted iron is cleaned back to sound metal and primed with a rust inhibiting primer. Detailed areas are brushed by hand so profiles stay crisp under the new finish.

How long does an epoxy garage floor last?

With normal residential use, a properly applied epoxy or polyaspartic garage floor lasts ten to twenty years. What decides where yours lands in that range is surface prep, the grade of product used, and whether the topcoat is UV-stable so it will not yellow or peel near the garage door. We diamond grind rather than acid etch for that reason.

Can you coat outdoor concrete like pool decks and patios?

Yes. For pool decks, patios and walkways in direct sun, we use UV-stable polyaspartic and acrylic systems. They resist fading and peeling and handle the heat swings that make many coatings fail on outdoor concrete in South Florida. Non-slip texture is added so the surface stays safer underfoot when it gets wet.

What is the difference between epoxy and polyaspartic?

Epoxy is very durable and builds a thick, hard film, but it can yellow in sunlight. Polyaspartic cures faster, stays UV-stable and can be applied in a wider range of temperatures. We often combine them, using an epoxy base coat for build and a polyaspartic topcoat for UV resistance and a quicker return to service.

Ready for Concrete Stain & Epoxy in Palm Beach Island?

Request a free estimate or call (561) 251-6165 and we will set up a time to see your Palm Beach Island property.