Skip to main content

Pressure Washing in Palm Beach Island, FL

Pressure washing and soft washing that clears mold, mildew and grime from driveways, decks, roofs and walls without damaging the surface.

Pressure Washing for Palm Beach Island Homes

Salt film, mildew under hedges and black streaks on tile roofs are the most common cleaning problems on Palm Beach Island. Regular cleaning keeps a home looking maintained through the year and helps paint and roof coatings last longer between projects, since growth left in place slowly breaks coatings down.

We soft wash painted stucco, shutters and roofs at low pressure and use higher pressure only on concrete and pavers where it is safe. Hedges and garden beds are wetted and protected before cleaning solution goes on, and we rinse plantings again when we finish. Pool areas and outdoor furniture are covered or moved so runoff does not reach them.

What's Included

  • Assessment of each surface to choose pressure or soft washing
  • Pre-treatment with biodegradable cleaning solutions
  • High-pressure cleaning of concrete, pavers and stone
  • Hot or cold water cleaning for stubborn stains
  • Soft washing of painted walls, tile roofs and screens
  • Detail cleaning of edges, corners and joints
  • Rinsing of plants and landscaping when finished

Want the full picture? Read our complete pressure washing guide or see everything we do in Palm Beach Island.

How We Prepare and Apply

  1. 1

    Walk the property

    We look at each surface, note delicate materials, and decide where high pressure or soft washing is right.

  2. 2

    Protect the surroundings

    Outlets, light fixtures and sensitive plants are covered or wetted, and outdoor items are moved off the work area.

  3. 3

    Pre-treat growth

    Heavily soiled areas get a biodegradable solution that loosens mold, mildew and algae before washing.

  4. 4

    Wash by surface

    Hard surfaces are cleaned at the right pressure and water temperature, while painted or delicate surfaces are soft washed.

  5. 5

    Detail the edges

    Corners, expansion joints, steps and the borders along walls and beds get focused attention for an even result.

  6. 6

    Rinse and review

    Everything is rinsed, plants are flushed of cleaning solution, and we walk the property with you at the end.

Pressure Washing in Palm Beach Island: FAQ

Does my Palm Beach exterior paint project need approval?

It may. The Town of Palm Beach has an Architectural Commission, and designated landmarks fall under the Landmarks Preservation Commission. Check with the Town before scheduling. We can provide color samples and product data sheets for your application, and we start once your approval is in hand.

Can you paint a condo unit on the island?

Yes. Many island condo buildings set rules for work hours, elevator use, parking and insurance paperwork. Share your building's requirements with us when you request an estimate, and we will plan the job around them. Interior work in a unit usually focuses on walls, ceilings, doors and trim.

How do you handle decorative stucco and ironwork?

We clean and inspect moldings, cast details and railings first. Cracked stucco is opened and filled with a flexible patch, and rusted iron is cleaned back to sound metal and primed with a rust inhibiting primer. Detailed areas are brushed by hand so profiles stay crisp under the new finish.

How often should I have my property pressure washed in South Florida?

We recommend washing driveways, walkways and pool decks at least once a year in South Florida. Homes near the water or under heavy tree cover may need cleaning every six months. Roofs and painted surfaces should be soft washed about once a year to keep mold and algae from building up. We can suggest a schedule after seeing your property.

What is the difference between pressure washing and soft washing?

Pressure washing uses high-pressure water to clean hard surfaces such as concrete and pavers. Soft washing uses low pressure and cleaning solutions to clean delicate surfaces like painted walls, roof tile and screen enclosures. The wrong method can damage a surface, which is why we assess each area before we start and often use both on the same property.

Will pressure washing damage my pavers or paint?

Not when it is done correctly. We adjust pressure, nozzle tip and distance for each surface. Pavers are cleaned at lower pressure so joint sand is not blasted out. Painted surfaces are always soft washed, never hit with high pressure. If a surface is already fragile, such as loose paint or cracked tile, we will point it out before cleaning.

Ready for Pressure Washing in Palm Beach Island?

Request a free estimate or call (561) 251-6165 and we will set up a time to see your Palm Beach Island property.