From the street, the roof is often the largest single surface you see on a South Florida home. Concrete and clay tile roofs darken with mildew and algae within a few years, and the original color fades under direct sun. A roof coating cleans up that look and adds a protective layer over the tile or metal underneath. Coastal Paint & Design applies elastomeric and acrylic roof coatings on homes across Palm Beach and Martin County.
Every roof job starts on top of the roof, not with the sprayer. We inspect for cracked or slipped tiles, exposed fasteners, damaged flashing and mold growth. The roof is then pressure washed and treated to remove dirt, lichen and staining. Cracked tiles are sealed or replaced, fasteners are treated, and a primer matched to the roof material goes on before two coats of coating are sprayed for even coverage.
A coating protects a sound roof. It is not a fix for active leaks or rotted decking, and we will tell you plainly if your roof needs a roofer before it needs us. Lighter, heat-reflective coatings help lower roof surface temperature during the long summer, which can ease the load on your air conditioning. If your community has rules on roof color, we can provide samples and product data sheets for your review submission.
- Barrel tile
- Curved barrel tile needs coating worked into every overlap so the color looks consistent from the street.
- Flat concrete tile
- Flat and low-profile concrete tiles take coating well once they are clean and fully dry.
- Metal roofs
- Metal panels get rust treatment and a primer made for metal before the topcoat.
- Flat roofs
- Built-up and modified bitumen roofs are coated with elastomeric systems that stay flexible as the roof heats and cools.
- Concrete roofs
- Concrete roof surfaces are cleaned, cracks are addressed, and a coating suited to the exposure is chosen.
- Asphalt shingles
- We do not coat shingle roofs, because the granular surface does not hold coatings well in our climate.
A professionally applied roof coating typically lasts seven to twelve years in South Florida. Elastomeric coatings on flat roofs tend to reach the longer end of that range. Tile roof coatings take more direct UV and are worn by anyone walking on the roof, such as technicians servicing a satellite dish, solar panels or rooftop equipment, so they often land nearer the shorter end.
Shade and moisture shorten a coating's life in a different way. Roofs under heavy tree canopy stay damp and grow mildew faster, and debris sitting in valleys holds water against the surface. Keeping branches trimmed, gutters and valleys clear, and having the roof looked over after major storms helps a coating stay intact. Ask anyone who needs to go up there to step carefully on coated tile.