Skip to main content

Concrete Stain & Epoxy in Lake Worth, FL

Ground, repaired and sealed concrete coatings for garages, patios, pool decks and commercial floors that resist stains, wear and moisture.

Concrete Stain & Epoxy for Lake Worth Homes

Plenty of Lake Worth Beach homes have carports, side patios or a detached garage with older concrete that has picked up oil spots, rust marks and cracks over the years. We diamond grind the surface to open the pores, fill cracks and divots, and then apply an epoxy or polyaspartic system suited to how you actually use the space.

For patios and walkways, a penetrating stain or a decorative coating can tie old concrete into a fresh exterior color scheme. Outdoor slabs need a finish with some grip underfoot and a UV stable topcoat so the color does not yellow. Most garage floors are completed in one to two days, with foot traffic allowed after about 24 hours.

What's Included

  • Moisture testing and inspection of the slab
  • Diamond grinding to remove contaminants and profile the surface
  • Crack, joint and divot repair
  • Epoxy or polyaspartic base coat
  • Chip flake broadcast, metallic or solid color finish
  • Acid stain finishes for a natural stone look
  • UV-stable, chemical-resistant topcoat
  • Non-slip additive for areas that get wet

Want the full picture? Read our complete concrete stain & epoxy guide or see everything we do in Lake Worth.

How We Prepare and Apply

  1. 1

    Assess the slab

    We check for cracks, old coatings, oil saturation and moisture, which tells us which system and primer the floor needs.

  2. 2

    Clear and degrease

    The area is emptied, swept and degreased so grinding does not push oil and dirt deeper into the surface.

  3. 3

    Diamond grind

    Industrial grinders profile the concrete and strip sealers and contaminants, with dust collection keeping the work area cleaner.

  4. 4

    Repair defects

    Cracks, spalls and divots are filled and ground flush so the finished floor is level and uniform.

  5. 5

    Apply base and topcoat

    The base coat goes down, with flakes or metallic pigment added where chosen, followed by the protective topcoat.

  6. 6

    Cure and hand back

    Most garage floors take foot traffic in 24 hours and vehicles in 72 hours, and we walk the floor with you before you use it.

Concrete Stain & Epoxy in Lake Worth: FAQ

Is Coastal Paint & Design really local to Lake Worth?

Yes. Our office is in the 33461 ZIP code, the Lake Worth area just west of the city limits. That makes Lake Worth Beach and its neighbors the closest part of our service area, which helps when you want an estimate walk-through or need us to come back and look at a touch-up.

Can you paint an older wood frame cottage without covering its character?

That is a common job in Lake Worth Beach. We hand scrape and sand trim and siding rather than burying old failures under new paint, and we keep details like window casings and rafter tails crisp. If you want to keep a period color scheme, bring photos or a paint chip and we will help you match it.

My house is in a historic district. Can you still paint it?

Yes. Before we start, check with the City of Lake Worth Beach to find out whether your exterior color or scope needs review. We can give you samples and product data sheets for the application. Once you have any approval you need, we set a start date and follow the approved colors exactly.

How long does an epoxy garage floor last?

With normal residential use, a properly applied epoxy or polyaspartic garage floor lasts ten to twenty years. What decides where yours lands in that range is surface prep, the grade of product used, and whether the topcoat is UV-stable so it will not yellow or peel near the garage door. We diamond grind rather than acid etch for that reason.

Can you coat outdoor concrete like pool decks and patios?

Yes. For pool decks, patios and walkways in direct sun, we use UV-stable polyaspartic and acrylic systems. They resist fading and peeling and handle the heat swings that make many coatings fail on outdoor concrete in South Florida. Non-slip texture is added so the surface stays safer underfoot when it gets wet.

What is the difference between epoxy and polyaspartic?

Epoxy is very durable and builds a thick, hard film, but it can yellow in sunlight. Polyaspartic cures faster, stays UV-stable and can be applied in a wider range of temperatures. We often combine them, using an epoxy base coat for build and a polyaspartic topcoat for UV resistance and a quicker return to service.

Ready for Concrete Stain & Epoxy in Lake Worth?

Request a free estimate or call (561) 251-6165 and we will set up a time to see your Lake Worth property.