Skip to main content

Concrete Stain & Epoxy in Delray Beach, FL

Ground, repaired and sealed concrete coatings for garages, patios, pool decks and commercial floors that resist stains, wear and moisture.

Concrete Stain & Epoxy for Delray Beach Homes

Garage floors in Delray Beach take heat, moisture and tire marks, and many single family homes in the city use the garage as a workshop or storage space. An epoxy or polyaspartic floor seals the concrete, resists stains and brightens the room. We diamond grind first so the coating bonds properly.

Outside, pool decks and patios can be stained or coated to refresh worn concrete and coordinate with a new exterior color. We repair cracks first and finish with a UV stable topcoat so the color does not chalk in the sun. Garages can usually take foot traffic in 24 hours and vehicles in about 72.

What's Included

  • Moisture testing and inspection of the slab
  • Diamond grinding to remove contaminants and profile the surface
  • Crack, joint and divot repair
  • Epoxy or polyaspartic base coat
  • Chip flake broadcast, metallic or solid color finish
  • Acid stain finishes for a natural stone look
  • UV-stable, chemical-resistant topcoat
  • Non-slip additive for areas that get wet

Want the full picture? Read our complete concrete stain & epoxy guide or see everything we do in Delray Beach.

How We Prepare and Apply

  1. 1

    Assess the slab

    We check for cracks, old coatings, oil saturation and moisture, which tells us which system and primer the floor needs.

  2. 2

    Clear and degrease

    The area is emptied, swept and degreased so grinding does not push oil and dirt deeper into the surface.

  3. 3

    Diamond grind

    Industrial grinders profile the concrete and strip sealers and contaminants, with dust collection keeping the work area cleaner.

  4. 4

    Repair defects

    Cracks, spalls and divots are filled and ground flush so the finished floor is level and uniform.

  5. 5

    Apply base and topcoat

    The base coat goes down, with flakes or metallic pigment added where chosen, followed by the protective topcoat.

  6. 6

    Cure and hand back

    Most garage floors take foot traffic in 24 hours and vehicles in 72 hours, and we walk the floor with you before you use it.

Concrete Stain & Epoxy in Delray Beach: FAQ

How often should I repaint my Delray Beach home's exterior?

Homes near the coast, where salt air exposure is highest, typically need exterior repainting every five to seven years. Homes farther inland may go seven to ten years. Washing the exterior between paint jobs removes salt and mildew and helps the coating last longer.

Do you paint homes in Delray Beach's historic districts?

Yes. Historic homes often have wood siding, wood windows and older paint layers, so prep is slower and more hands-on. Ask the city whether your exterior plans need review before we schedule. We can supply samples and product data sheets, and we stick to the colors you have approved.

My HOA in west Delray has a color palette. Can you work with it?

Yes. Give us the approved palette or color codes and we will order those exact colors. We can provide physical samples if your association wants to see them before approval. Once you have the go-ahead, we schedule the work and keep the job site tidy for neighbors.

How long does an epoxy garage floor last?

With normal residential use, a properly applied epoxy or polyaspartic garage floor lasts ten to twenty years. What decides where yours lands in that range is surface prep, the grade of product used, and whether the topcoat is UV-stable so it will not yellow or peel near the garage door. We diamond grind rather than acid etch for that reason.

Can you coat outdoor concrete like pool decks and patios?

Yes. For pool decks, patios and walkways in direct sun, we use UV-stable polyaspartic and acrylic systems. They resist fading and peeling and handle the heat swings that make many coatings fail on outdoor concrete in South Florida. Non-slip texture is added so the surface stays safer underfoot when it gets wet.

What is the difference between epoxy and polyaspartic?

Epoxy is very durable and builds a thick, hard film, but it can yellow in sunlight. Polyaspartic cures faster, stays UV-stable and can be applied in a wider range of temperatures. We often combine them, using an epoxy base coat for build and a polyaspartic topcoat for UV resistance and a quicker return to service.

Ready for Concrete Stain & Epoxy in Delray Beach?

Request a free estimate or call (561) 251-6165 and we will set up a time to see your Delray Beach property.