Skip to main content

Pressure Washing in Palm Beach & Martin County

Pressure washing and soft washing that clears mold, mildew and grime from driveways, decks, roofs and walls without damaging the surface.

Warm, wet weather means mold, mildew and algae come back on South Florida surfaces year after year. Driveways turn black in the shade, pool decks get slippery, north-facing walls go green, and screen enclosures collect grime. Beyond looks, that growth breaks down paint, stains concrete and makes walkways unsafe. Coastal Paint & Design cleans homes and commercial properties with equipment and methods matched to each surface.

Two different jobs go by the name pressure washing. Hard surfaces like concrete, pavers and stone can take higher pressure, sometimes with hot water, to lift stains and growth. Painted walls, tile roofs, screens and softer materials need soft washing instead: low pressure with cleaning solutions that kill mold and algae at the root. Using high pressure on the wrong surface can strip paint, etch stucco or crack tile, so we decide surface by surface.

Washing is also where every exterior painting and roof coating project we do begins, because coatings cannot bond to dirt, chalk or mildew. Even if you are not planning to paint, regular cleaning slows wear on your finishes and keeps the property looking cared for. On paver driveways and patios, we watch the joint sand closely and clean at a lower pressure so pavers are not loosened.

What's Included

  • Assessment of each surface to choose pressure or soft washing
  • Pre-treatment with biodegradable cleaning solutions
  • High-pressure cleaning of concrete, pavers and stone
  • Hot or cold water cleaning for stubborn stains
  • Soft washing of painted walls, tile roofs and screens
  • Detail cleaning of edges, corners and joints
  • Rinsing of plants and landscaping when finished

Surfaces We Work On

Driveways and sidewalks
Concrete is cleaned at higher pressure to lift tire marks, rust spots and black mildew from shaded areas.
Paver patios and driveways
Pavers are washed at lower pressure so the joint sand stays in place.
Pool decks
Pool decks are cleaned of slippery algae, with care taken around pool equipment and the water.
House walls
Painted stucco and siding are soft washed to remove mildew without stripping the paint.
Tile roofs
Roof tiles are soft washed to kill algae and lichen without cracking or eroding the surface.
Screen enclosures and fences
Screens, frames and fences are cleaned gently so the mesh and finishes are not damaged.

How Long It Lasts in South Florida

How long a clean surface stays clean depends on shade, water and the season. Driveways, walkways and pool decks generally benefit from cleaning at least once a year in South Florida. Properties near the water or under heavy tree cover often need it every six months. Roofs and painted walls do best with a gentle soft wash about once a year, so growth never gets a deep hold.

Soft washing tends to keep surfaces clean longer than water alone, because the solution kills mold and algae at the root instead of just knocking down what is visible. Between cleanings, you can slow regrowth by trimming plants and branches away from the house, aiming sprinklers away from walls and driveways, and clearing fallen leaves before they sit and stain the concrete.

Our Prep Process

  1. 1

    Walk the property

    We look at each surface, note delicate materials, and decide where high pressure or soft washing is right.

  2. 2

    Protect the surroundings

    Outlets, light fixtures and sensitive plants are covered or wetted, and outdoor items are moved off the work area.

  3. 3

    Pre-treat growth

    Heavily soiled areas get a biodegradable solution that loosens mold, mildew and algae before washing.

  4. 4

    Wash by surface

    Hard surfaces are cleaned at the right pressure and water temperature, while painted or delicate surfaces are soft washed.

  5. 5

    Detail the edges

    Corners, expansion joints, steps and the borders along walls and beds get focused attention for an even result.

  6. 6

    Rinse and review

    Everything is rinsed, plants are flushed of cleaning solution, and we walk the property with you at the end.

Pressure Washing FAQ

How often should I have my property pressure washed in South Florida?

We recommend washing driveways, walkways and pool decks at least once a year in South Florida. Homes near the water or under heavy tree cover may need cleaning every six months. Roofs and painted surfaces should be soft washed about once a year to keep mold and algae from building up. We can suggest a schedule after seeing your property.

What is the difference between pressure washing and soft washing?

Pressure washing uses high-pressure water to clean hard surfaces such as concrete and pavers. Soft washing uses low pressure and cleaning solutions to clean delicate surfaces like painted walls, roof tile and screen enclosures. The wrong method can damage a surface, which is why we assess each area before we start and often use both on the same property.

Will pressure washing damage my pavers or paint?

Not when it is done correctly. We adjust pressure, nozzle tip and distance for each surface. Pavers are cleaned at lower pressure so joint sand is not blasted out. Painted surfaces are always soft washed, never hit with high pressure. If a surface is already fragile, such as loose paint or cracked tile, we will point it out before cleaning.

Are your cleaning solutions safe for plants and pets?

We use biodegradable cleaning solutions and rinse surrounding plants before and after soft washing to dilute any runoff. We ask that pets and children stay inside while we work and until surfaces are rinsed and dry. Let us know about delicate landscaping, ponds or vegetable gardens so we can plan around them.

Should I pressure wash before painting?

Yes, and if we are painting your house it is already part of the job. Paint and coatings need a clean, chalk-free surface to bond. Washing also reveals cracks, peeling and soft spots that need repair before paint. If you hire us only for cleaning, we can still note any areas where the paint looks ready for attention.

What do I need to do before you arrive?

We generally connect to an outdoor spigot on your property, so please make sure the water is on and the spigot works on the day of service. Move cars off the driveway, bring in outdoor furniture or grills that are in the way, and close windows near any walls being washed. Let us know about anything fragile nearby.

Ready for Pressure Washing?

Request a free estimate or call (561) 251-6165.