Skip to main content

Cabinet Refinishing in Palm Beach & Martin County

Kitchen and bath cabinets sprayed to a smooth, durable finish, so your layout stays the same but the room looks new.

Cabinets set the look of a kitchen more than almost anything else in it. If the boxes are solid and the layout works, there is often no reason to tear them out. Coastal Paint & Design refinishes kitchen, bath, laundry and built-in cabinets with a sprayed finish that reads as factory work, not a weekend project. Dated oak, honey maple, tired white and builder-grade finishes can all be changed to the color and sheen you want.

A cabinet finish succeeds or fails on adhesion. Kitchen cabinets carry grease, hand oils and years of cleaning products, and most have a slick factory topcoat that paint will not stick to on its own. We take off the doors and drawer fronts, clean and degloss every surface, sand to give the primer something to grab, and apply a bonding primer made for cabinetry. Finish coats are sprayed and lightly sanded between coats for a smooth surface without brush marks.

Because nothing is demolished, the kitchen stays mostly usable. Countertops, appliances, backsplashes and floors are covered while the frames are sprayed, and doors are finished away from the cabinet boxes. Most kitchens take three to five working days, and a bathroom vanity can often be done in one to two days. You can keep your hardware or choose new pulls and hinges, and we install them at the end.

What's Included

  • Removal and labeling of doors, drawers and hardware
  • Protection of countertops, appliances, floors and backsplash
  • Degreasing, deglossing and hand sanding
  • Bonding primer made for cabinetry
  • Multiple sprayed coats of cabinet-grade paint or lacquer
  • Light sanding between coats
  • Reinstallation and alignment of doors and drawers
  • Installation of new hardware if you choose it

Surfaces We Work On

Kitchen cabinets
Frames, doors, drawer fronts and exposed end panels are refinished as one matched set.
Bathroom vanities
Vanities face daily moisture, so prep and primer matter even more on these smaller pieces.
Laundry and garage cabinets
Utility cabinets can be updated to match the house or given a tough, easy-wipe finish.
Built-ins and bookcases
Built-in shelving, entertainment walls and bar cabinets are refinished in place with careful masking.
Laminate and thermofoil
These slick surfaces need a specialized bonding primer, and we will tell you up front whether your pieces are good candidates.
Kitchen islands
An island can be finished in a contrasting color to the perimeter cabinets for a two-tone kitchen.

How Long It Lasts in South Florida

A properly prepared and sprayed cabinet finish holds up well to everyday kitchen use. The spots that wear first are the ones hands touch most: door edges near the sink, the trash pull-out, and drawers beside the stove. Heat and steam from a dishwasher or kettle can soften a finish over time, and cleaners with strong solvents will dull the sheen faster than normal use will.

Humidity matters too. In South Florida, a kitchen in a house left closed and warm for months can see moisture affect any finish, so keeping the air conditioning running helps. To get the most from refinished cabinets, wipe them with a soft damp cloth and mild soap, dry doors after spills, and wait for the steam to settle before opening the dishwasher. Small chips can be touched up with leftover paint.

Our Prep Process

  1. 1

    Assess the cabinets

    We check the material, the current finish and any water damage, and talk through color, sheen and hardware.

  2. 2

    Remove and label

    Doors, drawer fronts, hinges and pulls come off and are labeled so every piece goes back where it came from.

  3. 3

    Clean and degloss

    Grease and residue are removed with a degreaser, then the old topcoat is deglossed so primer can bond.

  4. 4

    Sand and fill

    Surfaces are hand sanded, and dents or open grain are filled where you want a smoother look.

  5. 5

    Prime

    A high-adhesion bonding primer seals the surface and gives the finish an even base.

  6. 6

    Spray and reassemble

    Finish coats are sprayed with light sanding between them, and once cured, the doors and drawers are rehung and adjusted.

Cabinet Refinishing FAQ

How long does cabinet refinishing take?

Most kitchen cabinet refinishing projects take three to five working days. Bathrooms and smaller projects may be done in one to two days. The exact timeline depends on how many doors and drawers there are, the condition of the current finish, and whether you are adding new hardware. We give you a schedule before we start.

Will refinished cabinets hold up to daily use?

Yes, when the prep is done right. Degreasing, deglossing, sanding and a bonding primer made for cabinets are what let the finish resist chipping, scratching and moisture. Skipping any of those steps is the usual reason painted cabinets peel. We do not cut corners on prep, because the finish coat is only as strong as what is under it.

Can you refinish laminate or thermofoil cabinets?

Often, yes. Laminate and thermofoil need a specialized bonding primer and specific prep. Thermofoil that is already peeling or bubbling, usually near the oven or dishwasher, may not be a good candidate because the film itself is failing. We look at each project in person and tell you honestly what result to expect.

Can I use my kitchen while the cabinets are being refinished?

Mostly, yes. Because the doors are removed and sprayed separately, the cabinet boxes sit open for a few days, but the sink, refrigerator and appliances stay in use. There will be stretches when we ask you to keep the kitchen clear while the frames are sprayed. We plan those windows with you so meals are disrupted as little as possible.

Can you change the hardware at the same time?

We can reinstall your existing hinges and pulls after cleaning them, or install new hardware you choose. If new pulls have a different hole spacing, we can fill the old holes and drill new ones during prep so they disappear under the finish. Soft-close hinges can also be added while the doors are off.

What colors and sheens can I choose for cabinets?

Any color can be used, including matches to Sherwin Williams, Benjamin Moore or a custom sample you bring us. White, soft gray, navy and deep green are popular cabinet choices. Satin and semi-gloss are the most common sheens because they wipe clean easily, while a lower sheen helps hide minor dents on older doors.

Ready for Cabinet Refinishing?

Request a free estimate or call (561) 251-6165.